Drilling
Brand: ALPEN
MPN: ALP30005-1
//Alpen KERAMO EXTREME
PORCELAIN/GRES TILE Drill Bits
Size:
ø 5.0 x 105 mm
Packaged: Qty 2
Range of application:
For extremely hard porcelain/gres tiles up to Mohs/Ritz hardness 9 and glass. No cooling required. Please note max. spindle speed 200 rpm. Not suitable for percussion drilling. Shank DIN 3126, Form E6.3, ISO 1173
The perfect solution for the hardest porcelain/gres tiles up to Mohs/Ritz hardness 9 and glass.
Universal application due to the use in..
N$ 570.98
Ex VAT:N$ 496.50
Brand: ALPEN
MPN: ALP KIT13
KERAMO PROFI MULTICUT & F8 EXTREME 13 PCE SET 6 8 10MM TX & PZ BITS....
N$ 2,266.08
Ex VAT:N$ 1,970.50
Brand: FESTOOL
MPN: FES769061
Festool Key-type chuck CC-16 FFP
Order number: FES769061
Model: CC-16 FFP ....
N$ 5,383.15
Ex VAT:N$ 4,681.00
Brand: TORK CRAFT
MPN: TC911049
Lock installation kit
Included
in the kit:
(x1) ø54mm carbon steel hole saw
(x1) Hole saw mandrel
(x1) ø25mm spade drill bit
Application:
The kit is used to install lock sets with a ø22mm latch hole and a ø54mm dead
lock bolt.
Use the paper template provided with the lock set which have the markings to
be transferred unto the door. Drill the ø54mm hole from both sides of the door to
prevent horrendous breakout.
The
kit can be used to install locks from the following..
N$ 92.00
Ex VAT:N$ 80.00
Brand: TORK CRAFT
MPN: CM99
Left hand Thread Screw
Special
screw with left hand screw thread to lock a chuck to the motor shaft. This screw
performs a very important role. If one uses a
drill in reverse rotation, the chuck will come off. This screw locks the chuck
in place. For your own safety, always install the screw when replacing a chuck.
Chuck removal:
To remove the chuck, loosen the screw by turning it in the clockwise direction.
The chuck loosens in the normal direction i.e. turning anti- clockwise
..
N$ 32.20
Ex VAT:N$ 28.00
Brand: ALPEN
MPN: ALP71510
MACHINE DIE COBALT 10MM SPIRAL POINT IN POUCH 1.5MM PITCH....
N$ 1,266.15
Ex VAT:N$ 1,101.00
Brand: ALPEN
MPN: ALP71512
MACHINE DIE COBALT 12MM SPIRAL POINT IN POUCH 1.75MM PITCH....
N$ 1,551.35
Ex VAT:N$ 1,349.00
Brand: ALPEN
MPN: ALP71503
MACHINE DIE COBALT 3MM SPIRAL POINT IN POUCH 0.5MM PITCH....
N$ 907.93
Ex VAT:N$ 789.50
Brand: ALPEN
MPN: ALP71504
MACHINE DIE COBALT 4MM SPIRAL POINT IN POUCH 0.7MM PITCH....
N$ 789.48
Ex VAT:N$ 686.50
Brand: ALPEN
MPN: ALP71505
MACHINE DIE COBALT 5MM SPIRAL POINT IN POUCH 0.8MM PITCH....
N$ 789.48
Ex VAT:N$ 686.50
Brand: ALPEN
MPN: ALP71506
MACHINE DIE COBALT 6MM SPIRAL POINT IN POUCH 1.0MM PITCH....
N$ 789.48
Ex VAT:N$ 686.50